October 13, 2008

All About Hot Tub Water


All About Hot Tub Water

A majority of hot water tubs incur chemistry problems because of the improper diagnosis with test strips. Some people think that just by dipping them into the water, they will get an accurate prognosis of what's wrong with the water in the hot tub or spa.


There is some truth to that. You can actually troubleshoot hot tub or spa problems on your own. The important thing you should be aware of is how to diagnose these properly and the steps you must take in order to fix the water problem.


For future resources, here is a run through of the possible solutions to water chemistry problems in the hot tub or spa.


1. You should always make sure that the water in your hot tub is safe. You may get a lot of tips online claiming that the safest hot tub water is less stringent. Nonetheless, it is highly recommended that the water be reduced to a low point in order for your family and yourself to enjoy your hut tub safely.


2. Purchase the chemicals you will need for your hot tub from the best store. Get them in pristine condition. Just make sure that you read the details of each chemical before you actually put it in your hot tub.


3. You have to test the chlorine levels and make sure that they fall in the range of 3 to 5 mg for every liter. This is the required dosage for every hot tub. Test the pH levels and check whether they are between the range of 7.2 to 7.6. If it doesn't, then you have to toggle the hot tub pH content and meet these figures. If the water foams, then use the anti-foam. You can also go for the diluted form which comes in spray bottles. Spray them on the surface of the water.


4. You should put oxidizing agents like Calcium Hypochlorite or Non chlorine in your hot tub once every week. These clean the filter. You should also have spare filters which you use whenever you dry one. Notice that the fibers of the filter are bound together after you clean them.


Things to remember if you have a Hot Tub


1. Calcium Hardness

You have to get the right calcium level in the water. The calcium levels depend on the source of water, where you get your supply and where you live. Soft water has low calcium while hard water has higher calcium. Each time you refill the tub with water, you have to check the calcium level.


Ideally, the calcium level that is appropriate for a tub ranges between 100 up to 200 mg for every liter. If the calcium level for the tub is less than this, then it might result in damage or corrosion. If you find that the level of calcium is lower than the range mentioned, then use products such as the Hot Tub Hardness Plus in order to increase the calcium level up to the ideal.


If the level of your hot tub is way above than the ideal, then the results will be cloudy water. You can deposit the excess calcium on the heater element, tub shell, filter cartridge or in the pipe. You can also use the product No Scale in order to bring it to the calcium level you prefer.


2. Alkalinity

This depends on where you get your water. You should always check whether fresh water has been added. Ideally, Alkalinity for the hot tub ranges between 125 up to 500 mg per liter. If this stays in this range, then the water doesn't fluctuate. If it drops, then the water becomes corrosive and causes damage on the equipment. We therefore suggest you use the product pH plus in order to increase the alkaline level.


However, if the alkaline level is higher than the ideal, then the water is not that clear and scales slowly form. In order to reduce this, we recommend ph Minus.


3. pH Levels

It's important that you check the hot tub ph level on a regular basis. Use the Test Strips that you can buy over the counter at your local drug stores. Ideally, the pH range equates 7.4 up to 7.6. The alkaline protects the equipment and provides an ideal condition for the users because of its sanitizing effect.

October 09, 2008

Calling in the Hot Tub Cavalry


Calling in the Hot Tub Cavalry

As much as most of us men pride ourselves on our ability to fix and maintain just about anything around the house, there are some things we draw the line at. At least if we're smart. Deep indoor plumbing is one type of nightmare that has scarred several Do It Yourself handymen for life - at least until the next beer.


Now, for those lucky, rich, and/or ingenious enough to have hot tubs installed in their houses, the plumbing nightmare multiplies threefold as a screw-up with a hot tub's piping can often lead to flooded basements and large bruises from the wife. To avoid these harsh penalties, smart men know their limits, and know when to call in the experts. Here is a brief guide to finding a good, reliable professional to handle your hot tub repair problems.


The Easiest Step


The first and easiest option (and also the safest) is if your hot tub was sold to you with either a warranty and/or a service clause. In either of these cases, the people who sold you the hot tub will have specialists on their staff who HAVE to fix the tub or replace it if it's faulty, depending on your coverage.


In the event that you just bought a kit and installed it yourself, or if the warranty has expired, you should move on to the next step. Don't settle for just calling the people you bought it from if the warranty has bit the dust; their staff might not be competent, or they might charge you an arm and a leg. Start shopping around for a cheap yet reliable repair man.


Okay, so What's Busted?


While calling a specialist is all well and good, first you have to know what's broken. If the water isn't coming in properly, this may be a result of clogged pipes or a problem with the water pump. If the damage is directly to the shell of the hot tub, this is fairly easy to spot. Leaks, on the other hand, aren't restricted to shell damage.


Check the places where the pipes connect to the tub to see if the problem lies there instead. If one type of water (hot or cold) isn't coming in properly, it's often a pipe problem, BUT may also be damage to your water heater itself or to the electric wiring of the heater or tub. Try to find the source of the problem before you ask someone to make a house call.


Who yah Gonna Call?


Once you find the problem, (or think you have!) there are four general hot tub specialists who can help you with your various problems. The most common one that most people call on is the plumber. If the problem is with your pipes, you definitely want a plumber to do the work for you.


On the other hand, another type of specialist to call is someone who remodels hot tub shells. Call this type of specialist if the damage is due to a leak in the actual shell of the tub. Repairing a ceramic tub shell is beyond either the skills or the equipment of most DIY handy men. If you've determined the damage is to the water pump or heater, the first instinct of most people is to call a plumber.


However, mechanics specializing in small motors and household appliances are better in this case. Not every plumber is trained to deal with a mechanical problem - their specialty is in pipe related problems.


Lastly, if the problem is electrical in nature like a busted power outlet that runs your water pump, call an electrician. While replacing wiring may seem simple, remember that you're also working with water here - the last thing you want to do is strip a cable and leave little parts exposed to all that wonderful water you're bathing in...


How can you be sure you're not getting ripped off?


You can't. it's a sad but true fact that when you call in a specialist they have control over the situation - they can easily claim any number of damages that need "fixing" and charge you for each separate repair job.


The only real way to keep yourself protected in this case is to rely on your own experiences as a Do It Yourself handyman. Keep close to the repair man as he goes over the problem, and ask frequent questions and clarifications as to the nature of the problem and how he's going to fix it.


If he starts giving you lip about needing to work "in peace", just assert the fact that YOU'RE the one paying his bill, so if you want to ask questions it's your right to do so. More importantly, if you show that you're on the ball and keeping an eye on him, he'll be less inclined to fabricate problems (assuming you get a dishonest one). Still, one of the best ways to make sure you get a decent repair man is to ask for recommendations from your friends and family; if several people can attest that a certain person's services are competent and prices are fair, go with it.

October 08, 2008

Simple Steps for Effective Hot Tub Maintenance


Simple Steps for Effective Hot Tub Maintenance

Your hot tub is built to be tough and durable, able to withstand all that heat and weight but without proper maintenance, it won't be long before you'll need to replace it. Avoid this unnecessary expense and use these simple maintenance tips to prolong the life of your hot tub so you can enjoy its benefits longer:


Know your hot tub


Your hot tub comes with the manufacturer's instruction manual. Read this guide before using your hot tub and try to familiarize yourself with your particular tub system. Hot tubs might have the same use but not all of them have the same functions. Try to learn about how your unit works.


Learn to identify your tub's pump, heater, control box, timer, thermostat and filter. Familiarize yourself with how it's supposed to work, look and sound so if anything goes wrong, you will be able to tell immediately.


Clean your filtration system


Your filtration system is the main hot tub component that keeps the water clean and safe. If you're a regular hot tub user, clean your filters regularly; at least once or twice a week. At first, your filtration system will do an excellent job at making sure your water is good to use. Over time, the filters will start to degrade even with regular cleaning. Replace your filters after about 10 to 12 months.


Check your heater and pumps regularly


Part of your hot tub maintenance schedule should be to inspect your heater and pumps to ensure that they are working properly. If you notice any deficiency in performance, such as when water temperature becomes too cold or too hot even when controls are set or if water is not drained properly, check these components immediately. It is much easier to correct a problem with your equipment early on than to wait until it breaks down. If you are unfamiliar with the problem, call your manufacturer or have your hot tub serviced immediately.


Clean your hot tub


One of the reasons why you should be conscious of the maintenance of your hot tub is water safety. Test the water regularly to determine its pH level. Apart from the fact that the inappropriate pH level can affect your skin, it can also promote corrosion of the heater coil. Once the coil is corroded, the heater will become inefficient in producing heat. Test your water at least once weekly. You might also want to change your water every 8 to 12 weeks, depending on use.

September 25, 2008

The Ultimate Socializing Hot Tubs


The Ultimate Socializing Hot Tubs

With the continuous popularity of tubs installed in modern homes, the shapes have also evolved into various sizes and shapes. On the market, you may choose from various kinds like the round hot tubs or rectangular hot tubs, there are also small ones which accommodate only a couple of persons and many other shapes depending on the caprice and interest of the manufacturer.


Why the shape?


Since you are choosing from various shapes of hot tubs, there may be instances when you experience confusion in selecting your hot tubs. But you need to be reminded that the shape of the tub that you buy should fit in to the purpose you have for the hot tub. The reason behind that is because, the shape and size of the tub determines the amount of gadgets and jets attached on the tub.


Main purpose of the round hot tubs


The usual types of tubs are either rectangular or square in shape, but there are some round hot tubs now on the market. This particular type of hot tub is said to offer a wider array of benefits as compared to the conventional square hot tubs. Since hot tubs these days are included in the options of people who want to socialize, the round hot tubs enable the people to enjoy an effortless position as they splash in the bubbling hot water.


So you can just imagine that every one in the tub can converse easily because they are facing each other. This is the most basic problem encountered by group of people who want to socialize in the square hot tub. It is because there is high probability that everyone will face in a different direction, along with different elevation which makes it more difficult to chat.


Plans with the round hot tubs


In the event that you want to have a hot tub party with some of your friends it is ideal that your hot tub have room for six persons or more so that there won't be people left outside the tub. The best area to place your round hot tub is in the garden, where it will be the center of attention while relaxing inside your tub.

Hot Tub Bacterium